How to Fix A Glowing White Spot on the 10.5-inch or 12.9 inch iPad Pro

IMG_1746

Do you have a glowing white spot at the location about 3 or 4 inches above your home button on your 10.5 inch or 12.9 inch (1st and 2nd Gen) iPad Pro?

This is a problem caused by the display cable underneath pushing against the back of the display, creating a pressure point. It is only found on the first and second generation 12.9 inch iPad Pro, and the 10.5 inch iPad Pro (and iPad Air) as the 10.5 inch iPad has a similar design/layout as that of the original 12.9 inch iPad Pros. This issue has also spawned an entire thread on MacRumors forums, and caused agony for a lot of owners.

Unless you purchased your iPad from old stock and have Applecare, it is likely that they are no longer covered by Appleā€™s warranty. If you do not notice the spot or are not bothered by it, then that is the best scenario. Do not do anything about it. However, if you cannot stand the sight of the white spot when your the majority of your display is white or light coloured, then maybe try out this possible solution.

Warning, due to the possibility that some display glass might be weak from a previous drop, or that the strength of some suction cups might be too strong, MacRyu is definitely not responsible for any possible breakage to your iPad.

This method also does not work on iPads with screen protectors installed as only the screen protector will be lifted (or broken) when you try to pull off the suction cup.

Finally, this method will not work for every iPad with the problem. It is only good to try if you are very very bothered by the white spot.

  1. Find a suction cup, something from Daiso will do. Preferably it should be at least 3 to 4 cm wide.
  2. Stick it to the area of the display where the spot is.
  3. Pull the suction cup up straight away from the display, slowly.
  4. Please use your judgement, stop once you think there is any danger of breaking your iPad display.

The lifting of the iPad display with the suction cup sometimes pull the display away very slightly, enough to relieve the pressure point caused by the display cable underneath. It may come back in the future if you excert pressure on the iPad somehow (eg. by holding it with one hand in landscape, or not using a sturdy case and putting it in a bag where books can cause pressure). It is a design flaw, which is likely why Apple moved away from the design as soon as it could.


About MacRyu.com

MacRyu is the Mac Blog by Singaporeans and for Singaporeans. It was started in April 2007 as a side project of the then President of the Official Mac User Group of NUS, Ryu, and grew to become possibly one of the most popular Apple-related sites based in Singapore. MacRyu hopes to provide you with more Mac-related info, thoughts and stuff, from the Singaporean perspective.

About Sponsored Posts

MacRyu is welcoming sponsored posts to offset the cost of hosting this site. Do email Ryu to make a fair offer, we will be most willing to consider your offer. COVID-19 has not been kind, and MacRyu appreciates all help to keep the site running.

Subscribe to RSS (site)

Steve Jobs (1955-2011)

Categories

Google Search